DodgeIntrepid.Net Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
22 Posts
Discussion Starter #1
Ok, so I got new bulbs for my car in an attempt to get better night visibility, I installed the first one, driver's side, so far so good. I went to take out the mounting screws and a loud pop emanated from the bracket
 

·
Registered
Joined
·
137 Posts
yes, i made a thread about this a few weeks ago, i replaced my headlights too, and fouind out that 4 of 6 of the mounting screws on my mounts broke off, best thing to do is this: I drilled the bottom of the bracket where the nut is held in, and made it so i could pull the screw up as much as possible. second i took a hacksaw and cut the screw at the head so i could take it out easily. third i replaced the lights then i used zip ties to secure the apparatus to the holes where the screws were, havent had any problems yet. good luck:bigsmile:
 
1 - 2 of 2 Posts
Top