DodgeIntrepid.Net Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
605 Posts
Discussion Starter · #1 ·
Okay peeps i installed my clifford arrow 3 into my 98es.I have the black keys and not the gray key.I hooked up the lock and unlock outputs with the proper resistors,but for some strange reason,every now and then when you disarm the alarm and it unlocks the doors,when you open the door the horn starts honking.Is there anyway i can unhook the factory keyless module to keep this from happening?Any help would be greatly appreciated..
 

·
Registered
Joined
·
605 Posts
Discussion Starter · #4 · (Edited)
Okay i found a wiring note that says that disarm requires a positive trigger thru a 680 ohm resistor.So i could come off of the same unlock wire from the relay and just put the 680 ohm resistor inline..
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top