DodgeIntrepid.Net Forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
83 Posts
Discussion Starter #1
Oil, Oil everywhere, Well I think my front crank seal has gone. There is oil all over the front of the engine and the belts have picked it up and thrown it everywhere. What I am wondering is has anyone changed out the front crank seal, if so how bad a job is it. Any help would be appreciated.

Thanks,
Mike
 

·
Registered
Joined
·
1,061 Posts
Just did mine a week ago, took me around 2 hours.. You need a 3 prong puller, take the 2 radiators out and take off the belts, pull the crank pully and re-sit the seal... I got a mopar seal, it was cheaper (See my Mopar parts post)

Si
 

·
Registered
Joined
·
83 Posts
Discussion Starter #3
Hey Si,

When you did yours did you have to drain the oil or does it set low enough in the pan not to leak out?

Mike
 

·
Registered
Joined
·
1,061 Posts
I didnt have to drain the oil :)

Good point! :)
 

·
Registered
Joined
·
2,427 Posts
Si!!
 

·
Registered
Joined
·
4,811 Posts
I had mine changed a couple months ago. It was done by the dealer so I can't tell you how hard it was.
 
1 - 7 of 7 Posts
Top