Greetings from the Wastelands of NJ
Hello my fellow Road Warriors!
Just picked up a 2000 300M and am looking forward to hanging out here. I am building my 300M into a "one of none/what if?" 2000 Eagle Vision TSi. Since the 300M basically would have been the 2nd gen Vision I figured it would be fun to create my own "Vision.'
Just picked up a 2000 300M and am looking forward to hanging out here. I am building my 300M into a "one of none/what if?" 2000 Eagle Vision TSi. Since the 300M basically would have been the 2nd gen Vision I figured it would be fun to create my own "Vision.'
1 - 19 of 19 Posts
Yo that would've been sick! It almost looks like a Saturn at first glance.
That actually looks like a good design for what would’ve been the 2nd gen eagle vision. I didn’t realize that they had the whole thing designed and they just stuck Chrysler badges on it and sold it as the 300m.
I remember reading somewhere that Chrysler had produced 2nd gen Vision prototypes and even went so far to extend production of the 1st gen Visions through September of '97 so that Jeep-Eagle dealers were adequately stocked with Visions before the new generation would be introduced for '98.
Of course this all went by the wayside when Daimler merged with Chrysler and the Germans decided to axe the Eagle brand altogether in '98. Vision production did proceed during September of '97 but the nameplate would not continue after that. Hence the decision to rename it a Chrysler (although they should have kept the Vision moniker - 300M never worked for me since these cars never produced 300 horsepower and the 1st gens were being marketed as the Chrysler Vision in Europe).
Of course this all went by the wayside when Daimler merged with Chrysler and the Germans decided to axe the Eagle brand altogether in '98. Vision production did proceed during September of '97 but the nameplate would not continue after that. Hence the decision to rename it a Chrysler (although they should have kept the Vision moniker - 300M never worked for me since these cars never produced 300 horsepower and the 1st gens were being marketed as the Chrysler Vision in Europe).
I'm building a custom grill that will be highlighted by the Eagle emblem. And I'm going to place Eagle badges strategically around the rest of the car. I'm also hoping to pick up an Eagle Vision steering wheelBased on these pics, all you'd need to do is remove the Chrysler badges inside and around the car and replace them with the Eagle head.
View attachment 43198
Good luck getting a 1G steering wheel to fit in a 2G car along with the airbag.
That sure will be a very cool car! Good luck!I'm building a custom grill that will be highlighted by the Eagle emblem. And I'm going to place Eagle badges strategically around the rest of the car. I'm also hoping to pick up an Eagle Vision steering wheel
Sounds like an interesting “Unicorn” build.
Consider showing it off at Carlisle. Guaranteed to get some looks from the LH folks!
Consider showing it off at Carlisle. Guaranteed to get some looks from the LH folks!
Fr! Ik this is off topic but do you know of any LH meets that happen or have happened in the mid west, preferably near northern Illinois or southern Wisconsin? The only one I know of is in Carlisle.Sounds like an interesting “Unicorn” build.
Consider showing it off at Carlisle. Guaranteed to get some looks from the LH folks!
JordanS : This may be closer..... 2023 Nationals Event Info | The Nats
Bob: Interesting project, Be sure to share this with the 300M group.
Bob: Interesting project, Be sure to share this with the 300M group.
Thanks! I’ll check it out!JordanS : This may be closer..... 2023 Nationals Event Info | The Nats
Bob: Interesting project, Be sure to share this with the 300M group.
There WAS one in southern Wisconsin. My memory is rusty, and I haven't been on the forum here in a LONG time, but there was a hopping good time on a country property there. I had the privilege to attend Art's shindig. Miss those meets.Fr! Ik this is off topic but do you know of any LH meets that happen or have happened in the mid west, preferably near northern Illinois or southern Wisconsin? The only one I know of is in Carlisle.
Sent from my SM-G996U using Tapatalk
Alright. I’ll have to do some research and see what’s around. Also the country out here is really beautiful. If you can find a plot cheap enough, it would be a great place to end up.There WAS one in southern Wisconsin. My memory is rusty, and I haven't been on the forum here in a LONG time, but there was a hopping good time on a country property there. I had the privilege to attend Art's shindig. Miss those meets.
Sent from my SM-G996U using Tapatalk
I'm in North Central ND, but my bother lives in the country north of the Twin Cities. If I find myself visiting him....Alright. I’ll have to do some research and see what’s around. Also the country out here is really beautiful. If you can find a plot cheap enough, it would be a great place to end up.
Sent from my SM-G996U using Tapatalk
Yea fs! I would assume you’d take i90 west right past me. Hopefully by then my Dodge is working well.I'm in North Central ND, but my bother lives in the country north of the Twin Cities. If I find myself visiting him....
Sent from my SM-G996U using Tapatalk
However I am in town, just east of Madison.I'm in North Central ND, but my bother lives in the country north of the Twin Cities. If I find myself visiting him....
Sent from my SM-G996U using Tapatalk
1 - 19 of 19 Posts
DodgeIntrepid.Net Forums
A forum community dedicated to Dodge Intrepid owners and enthusiasts. Come join the discussion about performance, modifications, specs, parts, classifieds, troubleshooting, maintenance, and more!
Full Forum Listing
Recommended Communities
