DodgeIntrepid.Net Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
1,756 Posts
Discussion Starter · #1 ·
So I was there this morning wasting some time after I washed the car, so I descided to rip off the pannel around the radio/ac control. I cannot seem to get it back in place properly, the 2 clips under the radio will not snap in properly. by dash is buldging, please help.
 

·
Registered
Joined
·
1,756 Posts
Discussion Starter · #3 ·
Ive already done that. actualy thats why both clips do not work. only the one on the left side did not go back in. so I took it back off again, now the right side is out
 

·
Registered
Joined
·
4,633 Posts
I had the same problem 2 months ago. I had too lossen the area around the shifter. Once the shifter panel was moved back the lower radio panel fit right in.Good luck.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top