I know I already put a message on this board... but used the stuff for taking water out of my gas... Didn't work... I failed to mention that my car dies quickly... It runs great for about 2 seconds. It's almost as if my engine simply shuts down... Very clean shut off... no sputtering... Help!!!
Hey guys... Car dies but stops immediately
Join the discussion
Recommended Reading
-
Anyone Ever Replace the Steering Coupler/Intermediate Shaft on their First Gen?
General Discussion (First Generation)After lurking through various old threads on the forum, most steering problems have been resolved by changing inner tie-rod bushings, tension strut bushings, lower control arms, and the steering rack itself. But has there ever been an instance where the coupler/intermediate shaft was the culprit...- 0
- 50
-
Got an Email from Glen Rissberger Today
General Discussion (First Generation)In my previous thread on Lateral Link Compatibility, EagleEsi made reference to a "Super uber rare sway bar," which was designed by Quickor. Naturally, I had to research this and so I contacted Glen Rissberger back in December. He noted that it had been over a decade since he had produced this...- 1
- 171
-
Help 3.5 lhs wont idle
General Discussion (First Generation)Help please I have a 3.5 lhs 95. The battery was dead from lights being left on. It was running great with only 130k I jumped it now it won't idle but the engine light is not on and when I turn the keys off and on it's not giving me any codes. What should I do first thanks- 8
- 558
-
Ed450x · updated
-
New 97, couple mechanical problems
General Discussion (First Generation)Hey everyone. I just picked up a 97 Chrysler Intrepid (Canadian spec) and the brakes are soft. Pads/discs are new but the brake fluid started leaking on the front passenger side after I drove it home for the first time today. Took it up the street to an indie shop and they tightened the brake...- 0
- 394
-
Scolirk · updated
-
Friction Modifier???
General Discussion (First Generation)When changing the diff fluid, does It require a friction modifier? I remembered having to use it in my 97 Ram, but was unsure about the Concorde. Also what is everyone's thoughts on using Lucas in the diff?- 2
- 312
-
Lexacocca · updated
Join now to ask and comment!