DodgeIntrepid.Net Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
284 Posts
You are going to need to purchase 2 new tension struts (#23) also. The ones you remove will be rusted, thinning them down where they go into the bushings both sides.
Most likely you will need to break the self locking nuts free by hand with a large breaker bar. Plenty of PB Blaster and there is a "flat" on the strut that you can hold with a large adjustable wrench.
Impact gun usually wont do it as the "impact" is adsorbed and displaced by the rubber bushing.
Be sure to torque the control arm to frame bolt with the weight of the care on it at "ride height"
 
1 - 1 of 1 Posts
Top