DodgeIntrepid.Net Forums banner
1 - 1 of 1 Posts

· Dain bramaged
Joined
·
7,866 Posts
Originally posted by ATFCharger:
Well, next I'm thinking when I have a day off I'll remove the whole unit and take it apart again. I only had the buttons and the face-plate off, so next is getting off the light-distribution plate (the big piece of 1/8" plastic that covers the lights).

Then if I can get the bulbs out, change them.

As for the cluster, that's another story. That requires removal of a good portion of the dash, but I would assume it be the same idea as above, to get at the bulbs to change them.

i've taken my controls out save your self some time.. don't bother tryin to get the bulbs out from the front.. it won't work..
ya gotta unscrew the board from the back and take the whole monkey lovin thing apart..
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top