DodgeIntrepid.Net Forums banner

1 - 1 of 1 Posts

·
Registered
Joined
·
1,675 Posts
Discussion Starter #1
Okay, I have my dashboard apart (again!) and I'm installing RKE. It was all going smoothy (aside from one soldering iron burn) until I had to connect the blue RKE harness white wire to the GY/TN wire in the grey harness on the BCM (cavity 15). My harness lacks that wire. So, I removed one of the wires from the harness that came with my donor BCM with the connector at the end of the wire and stuck it in the slot. Will this work? I'm done working on the car for tonight (ran out of light).


Thanks!
 
1 - 1 of 1 Posts
Top