DodgeIntrepid.Net Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
237 Posts
Discussion Starter #1

·
Premium Member
Joined
·
228 Posts
The 194s are the correct size for the map lights and the rear reading lights.

I used the WLED-xHP5 from superbrightleds.com in my map and reading lights. They're very bright. I used 4410-x9 LED Festoon bulbs in the doors.

The ones you're looking at may not be very bright. For the low price, you can get them and try them out.
 

·
Registered
Joined
·
237 Posts
Discussion Starter #3
Can you explain how you yank the map lights and the rear lights out?
 

·
Premium Member
Joined
·
228 Posts
My car has the long OTIS. I needed to remove it by removing a couple of screws that are hidden in the compartments. Then the OTIS drops down and you can access the bulbs. The bulbs sit in their sockets side ways.

For the rear lights, just get something thin to pop the clear lens off. These bulbs point straight out.
 
1 - 4 of 4 Posts
Top