DodgeIntrepid.Net Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
11,495 Posts
Discussion Starter · #1 ·
Came across this. It was originally designed for the Prowler, but I also read that it works on the 300m in a message board...

Anyways, wonder if it would work on a trep? And if so, maybe someone here would be interested...

http://www.magictouchdesigns.com/prowler_intake2.html
 

·
Registered
Joined
·
13,751 Posts
I don't think it will fit without some modifications. The install instructions say that on the prowler you need to remove the body side panal just to get to the air filter. Sounds like a different world from our cars. Comparing the pictures and angles on this tube to my L_Intake it looks like the filter ends up right on top of the heater hoses..not good.

Plus don't forget that you will need the EGR bypass which he sells for another $49.99 so your total is well over $200.
 

·
Registered
Joined
·
1,756 Posts
hows about the bypass kit, if I install one of those will it improve performance?
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top