My old 1998 SE with 2.7 converted to a 3.5 HO ES: details here
Exterior
Custom black metallic paint job (color code PXR see last set of pics)
Debaged
Black diamond headlights
D2R Bulbs
Lexus Balasts
Custom Painted tail lights and light bar
OEM Intrepid car bra
30% Window Tint
AVS Vent Shades
Door trim removed
Shortened antenna
OEM Spoiler
2007 Daytona wheels w/ Good Year 245/45/18 Tires (summer)
Interior
Leather Seats 60/40 split rear seat
Sunroof
Evic with home link
Auto Dimming rear mirror
Rear Courtesy lights
Automatic Temperature Control
Leather Shifter and steering wheel
Leather arm rest lid
Autostick with leather shift boot
Auto headlight switch
Black Concorde LXI gauge cluster
300M chrome shifter overlay
300M chrome door handles
300M chrome window switches
03+ Molded cup holder
Blue lighted key ring mod
Blue LED’s installed in Gauge cluster, Evic, ATC, window switch, and headlight switch
New OEM carpeting and floor mats
Newer style sail speaker covers
Headliner, Sun Screen, and Visors Dyed Black
Taupe panels repainted to Agate color
Custom switch panel with “TREP” lettering
Sound System
DEH-P6900-UB Head Unit
Ipod 30 GB
Alpine MRD-M1005 2 CH Amp
Alpine MRV-F545 4 CH Amp
ADS 6.5 component speakers
MB Quart RCE269 6x9 speakers
2 JL audio 12w3v2 D2 Subwoofers
1.5 farad Cap
JL Audio XA-PCS2-2 2 Gauge DUAL Amplifier Wiring Kit
Stinger PRO Series RCA's and speaker wire
Plexiglas amp racks with neons
Custom made “V” box
Dynomatted truck and trunk lid
Performance
300M special sway bar and bushings
2- T304 STAINLESS Exhaust Tips 3# dia, 18" long
Walker muffler 22354 inlet at 2.5" and 2 outlets at 2.25" dia
Maintenance and replacements
Suspension see here
Brakes and pads (x2)
Hub Bearings (x2)
Battery
Timing belt
Water pump
Tensioner roller, tensioner pulley
PVC valve
ATC head Unit (x2)
Thermostat
Camber adjusting bolts
Blower Motor Resistor
Blower Motor
Evap Temp Switch
Evaporator and drier
Radiator, cooler lines and hoses
Door Molding
Autostick Shifter
Interlock cable
Fog light housings
Keyless transmitter
Wiper blades (x2)
Tires (x3)
Spark Plugs (x2)
AC and main belts (x2)
Fluid Flushes
To Do List
3.5 HO Engine
3.89 gears
JoeKD intake
70mm throttle body
300M heated leather seats
Big 3 wiring upgrade
SPC quick-cam arms
300M Special PCM
ASP under drive pulley
Limited Slip Differential
Painted Brake Calipers
Intake spacer
160 Amp Alternator
Custom made A-pillar 3 gauge pod
Chrome mirror, head light switch, and cruise control buttons
Chrome under hood fluid caps
Painted Intake Manifold
Stock form
Modding Begins
Some system pics
New 3-27-09 pictures after PXR (black metallic flake) paint
Car looks sick, I want to find a set of those charger rims so bad.
And I was wondering how you painted the lights. Is it an exterior paint on top of the light or did you take it apart and paint the inside because i would love to do something similar to mine.
Car looks sick, I want to find a set of those charger rims so bad.
And I was wondering how you painted the lights. Is it an exterior paint on top of the light or did you take it apart and paint the inside because i would love to do something similar to mine.
Thanks! You should be able to find a set of the charger rims with black pockets on ebay, if not contact [email protected] For the tail lights, they are painted on the outside with the same paint used on the rest of the car. The paint was applied by a professional. I tried using Krylon spray paint in the past, but the paint fails after about a year even with a good primer. It just doesn't have the UV protection of a quality automotive paint.
Ya automotive paint would be the only lasting option for sure. And thanks for the wheel contact, I've only been finding chrome sets of that model of charger rim and the black pockets looks infinitely better IMO.
Ya automotive paint would be the only lasting option for sure. And thanks for the wheel contact, I've only been finding chrome sets of that model of charger rim and the black pockets looks infinitely better IMO.
I agree. If you use the wheel technologies, tell them to fully cure the black paint on the wheels, and not rush the delivery. One of the wheels I got from them had poor adhesion of the black paint. They corrected the issue and made it right. An OEM set would be better, but those are getting more and more difficult to find.
Wassup Guys, Its GreggieP from Dodgeintrepid.net and today I bring you Some updated pictures and info of my current project.
As you all know my 2.7l and I had a falling out and some piece of my rotating assembly decided that it no longer wanted to be apart of the engine so it said 'That's it I...
Introducing in picture my R/T
Did the brakes recently as the pads where worn and disc where so so.
Only downpoint : burnt paint on the roof and trunk, leather seat dry with stitching ripping. Also the top of the leather on the rear seat is discolored to the sun.
Bought with 28390 miles for...
i thought id consolidate my car, car club & racing videos into a youtube channel i made Concorde racing
i did a Dyno day event
I do a lot of 1/8 mile racing at hypoxia dragway its a small "po-dunk" raceway in Evanston Wyoming.
https://airdensityonline.com/track-results/Hypoxia_Dragway/...
I bought a set of chrome wheels for my snow tires... hehe
can see the orange coils on the front, the back is dumped. back needs new shocks/springs like the front got. id rather the front end get dumped but those are 300m special springs I had powder coated.
I have had my Intrepid for about 5 years. A 2.7...Runs good though. Happy with it.
Just joined this morning! I noticed that there are discussions about mods here. What have you done to your Intrepid?
I never knew I could do mods to my car. I used to work with a guy that kept updating his car...
A forum community dedicated to Dodge Intrepid owners and enthusiasts. Come join the discussion about performance, modifications, specs, parts, classifieds, troubleshooting, maintenance, and more!
Welcome to the site!
