DodgeIntrepid.Net Forums banner

redesigned true dual exhaust w/ electric cutouts.

543 Views 10 Replies 5 Participants Last post by  JordanS
many hours of mocking things up... this goes in directly after my X pipe.. painted everything with ceramic header paint. electric cutouts with a fob (clicker style) controller

this is the only route I've found without removing the gas tank. its a tight fit, an extra 1/2 inch will make everything not fit so lots of mocking up.
Bumper Automotive tire Gas Composite material Bicycle part
Gas Automotive exterior Composite material Wood Pipeline transport
Automotive tire Bicycle part Automotive exhaust Bumper Automotive design
Tire Automotive tire Tread Vehicle Synthetic rubber
Automotive tire Automotive exterior Bumper Fender Automotive exhaust
Tire Wheel Vehicle Automotive tire Car
Tire Wheel Automotive tire Hood Automotive lighting
See less See more
  • Like
Reactions: 1
1 - 2 of 11 Posts
Hey! I like the work!

You only working on the ground, or have access to a lift of some sort?

Sent from my SM-G996U using Tapatalk
If I could help in person, I would.

All the good vibes!

Sent from my SM-G996U using Tapatalk
  • Like
Reactions: 2
1 - 2 of 11 Posts