[dudes_]

How would one hookup a amp using the stock Infinity II setup.

it's on a 99' 300M the infinity amp is in the trunk.

Just wondering where I would run the remote turn on from.

Thanks

 

[Tiger]

A remote turn on needs a switched source, i would look for this switched source on the incoming wiring harness to the radio, use a test light or DVM, make sure you check that the power only comes on when the radio does, that way it goes off, when the radio does, make sense! :dance2:

 

[dbaudiopro]

You can use the same wire that triggers the Infinity II amplifier. Most places will call it the power antenna wire, but it's exactly what you are looking for. It's a white wire in the headunit harness and should still be a white wire at the amplifier, but you would have to check the FSM to be sure...