replacing carpet?
Join the discussion
Recommended Reading
-
Got an Email from Glen Rissberger Today
General Discussion (First Generation)In my previous thread on Lateral Link Compatibility, EagleEsi made reference to a "Super uber rare sway bar," which was designed by Quickor. Naturally, I had to research this and so I contacted Glen Rissberger back in December. He noted that it had been over a decade since he had produced this...- 2
- 257
-
Anyone Ever Replace the Steering Coupler/Intermediate Shaft on their First Gen?
General Discussion (First Generation)After lurking through various old threads on the forum, most steering problems have been resolved by changing inner tie-rod bushings, tension strut bushings, lower control arms, and the steering rack itself. But has there ever been an instance where the coupler/intermediate shaft was the culprit...- 5
- 215
-
190 MPH Concorde?
General Discussion (First Generation)So if it werent for the computer would it go 190MPH. This is why I ask. On the highway my Concorde is turning 2000 RPM's to go 65, at 2500 RPM's I'm at 80, 3000 RPM's 95. If you do the math every 500 RPM's is 15 MPH. So at 6000 that would be 190 MPH. In reality at red line your talking 205 MPH...- 17
- 1K
-
Headlight housing
General Discussion (First Generation)Are the headlight housing the same for all 1st gen Concordes? Will a '93 headlight housing fit on a '96?- 9
- 588
-
msmcintosh · updated
-
Help 3.5 lhs wont idle
General Discussion (First Generation)Help please I have a 3.5 lhs 95. The battery was dead from lights being left on. It was running great with only 130k I jumped it now it won't idle but the engine light is not on and when I turn the keys off and on it's not giving me any codes. What should I do first thanks- 8
- 621
-
Ed450x · updated
Join now to ask and comment!