[Tomci08]

ok guys i found a set of rims that i think might look pretty good on my car but im not sure if they would fit properly. Here are the specs for them

18x8 - i know will fit
5x4.5 - bolt pattern is correct
50mm offset - ???

and they originally came off a RX-8 so im guessing they are RWD? Would those work?

Any help is greatly appreciated. Thanks

Tom

 

[kcarlos2000]

I tried a set of Mazada wheels and they did not fit because of the hub bore. Make sure the hub bore is at least 71.5mm

 

[exup]

I bought 18x7.5 offset 43mm, now I can't to balance them properly, I need a spacers inside the rims. I wish I knew about this god damn offset thing.
Here is Zyoxx Zx3 rims on my 2000ES

 

[IntrepidCUB]

hmmm im not sure either but i can tell you that in my experience putting charger wheels on an intrepid and the offset the intrepid offset is +40 my RWD magnum wheels are +24 and they fit perfect BUT the magnum AWD offset is +55 and they will not fit a trep at all. but KCarlos had it right bout the bore and the hub check that out