Stock ES Wheel Offset

1 - 1 of 1 Posts

swartlkk

Registered

Joined Jun 17, 2001

1,122 Posts

Discussion Starter • #1 • Sep 18, 2001

Just trying to figure out what our stock ES rim offset is. I am looking at getting some aftermarket rims for my car and just want to double check on the offset so that I don't get it wrong and end up with tires that I can't use...

TIA

1 - 1 of 1 Posts

Recommended Reading

190 MPH Concorde?

General Discussion (First Generation)

So if it werent for the computer would it go 190MPH. This is why I ask. On the highway my Concorde is turning 2000 RPM's to go 65, at 2500 RPM's I'm at 80, 3000 RPM's 95. If you do the math every 500 RPM's is 15 MPH. So at 6000 that would be 190 MPH. In reality at red line your talking 205 MPH...
- 16
- 940
- N
  niwroc · updated 6 h ago
Anyone Ever Replace the Steering Coupler/Intermediate Shaft on their First Gen?

General Discussion (First Generation)

After lurking through various old threads on the forum, most steering problems have been resolved by changing inner tie-rod bushings, tension strut bushings, lower control arms, and the steering rack itself. But has there ever been an instance where the coupler/intermediate shaft was the culprit...
- 0
- 83
- D
  D725U · updated 9 d ago
Got an Email from Glen Rissberger Today

General Discussion (First Generation)

In my previous thread on Lateral Link Compatibility, EagleEsi made reference to a "Super uber rare sway bar," which was designed by Quickor. Naturally, I had to research this and so I contacted Glen Rissberger back in December. He noted that it had been over a decade since he had produced this...
- 1
- 179
- D
  D725U · updated 14 d ago
Help 3.5 lhs wont idle

General Discussion (First Generation)

Help please I have a 3.5 lhs 95. The battery was dead from lights being left on. It was running great with only 130k I jumped it now it won't idle but the engine light is not on and when I turn the keys off and on it's not giving me any codes. What should I do first thanks
- 8
- 565
- Ed450x · updated 21 d ago
New 97, couple mechanical problems

General Discussion (First Generation)

Hey everyone. I just picked up a 97 Chrysler Intrepid (Canadian spec) and the brakes are soft. Pads/discs are new but the brake fluid started leaking on the front passenger side after I drove it home for the first time today. Took it up the street to an indie shop and they tightened the brake...
- 0
- 407
- Scolirk · updated 1 mo ago