DodgeIntrepid.Net Forums banner
1 - 3 of 14 Posts

· Registered
Joined
·
111 Posts
Discussion Starter · #1 ·
Wanted to get the opinions of my fellow R/T owners about the wheels and tires I saw at Tire Rack (tirerack.com). The wheels are called Mille Miglia MM2 and are 18" x 8" at a cost of $179 each. The tires are 235/50-18 Bridgestone Potenza that sell for $189 each.
What is cool about the Tire Rack website is that you can see what your car looks like with the wheels before you actually buy them.
Please give me your opinion about these tires and wheels. Thanks
 

· Registered
Joined
·
111 Posts
Discussion Starter · #8 ·
Thanks to all who responded to my question. Just ordered the Mille Miglia 18 x 8 wheels from Tire Rack this morning at a cost of $179 each. I think I will go with the Dunlop Sport 9000 245/45ZR-18, it has a very good treadwear rating of 280. Discount Tire in Orlando quoted me a price of $1136 for four of these tires mounted and balanced out the door. After reviewing the numbers, my overall tire and wheel size will pretty much stay the same as I had with the 17's. But I will be losing about a half inch of sidewall, no big deal. Someone had asked about putting the 18's on his 98 Intrepid.
This should work as long as you keep the same or pretty close to the same tire/wheel size as before. For example, Take your 225/55/17 tire numbers, 225/25.4=8.86 inch tire width, 8.86 x .55= 4.87 inch sidewall height, 4.87 x 2=9.74, 9.74 + 17 (wheel size)=26.74 total wheel and tire diameter. If I go with the 245/45ZR-18, my overall wheel and tire diameter will be 26.68 inches which is pretty much the same as I had with the 17's. Thanks again to everyone for their input. R/T George
 

· Registered
Joined
·
111 Posts
Discussion Starter · #10 ·
The wheels were actually stamped MADE IN ITALY. I don't know anyway to actually prove where they were made. But thanks for the warning anyway.
 
1 - 3 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top