The gaskets between the EGR valve and the engine and the EGR valve and the tubes are a composite metal clad gasket (high heat gasket material sandwiched between two thin pieces of metallic film)...The gasket between the tubes and the intake plenum are silicone rings..All of them should be avaliable at parts house or dealer...

 

the silicon ring looks still fine. but the one between the tube and valve is definitely vanish.

since i do not have time to wait.

i just join them metal by metal after sanding each of them.

i do not hear any sound from there right now.

i will check with dealer asap.

thanks

 

are gaskets in the small plastic bag cater for this application?

 

Those are rubber gaskets for the intake plenums.

 

Probably not. They look like paper gaskets.

When I rebuilt my 2.7 I used a piece of and old exhaust manifold gasket I had hanging on the wall. I cut to size and punched out some holes.. instant EGR gasket.

 

in this case.

what is that two "paper type" gaskets intend for?

 

this is what can find from car-stuff.com regarding the air supply gasket looks like.

i can not see clue what kind of material it is.